JAMAR

Glamis GPS Cooridinates

CONTACT US AT funrunnerusa@yahoo.com or CALL US TOLL FREE AT  

JAMAR BP-1A SAND BUGGY PEDAL
This pedal assembly has polished Jamar MCX master cylinders on a polished mount with heavy duty chrome plated steel pedals. These are the same master cylinders used on race cares except they are polished for a touch of class. This unit includes a Jamar SCIX slave cylinder and the Jamar PAI throttle pedal. It is designed for sand buggies, but can be utilized in other light weight custom vehicles.

JAMAR BP2  SAND BUGGY PEDAL
This is a small, compact unit which includes a throttle, brake and hydraulic clutch all in one unit. The body is polished aluminum, incorporates two master cylinders, 11/16 clutch 3/4" brake. Pedals are chrome plated. Billet top lid and Billet roller pedal, includes a slave cylinder. Designed for sand buggy usage but it can be utilized in many other light weight custom vehicles.

JAMAR BP2A SAND BUGGY PEDAL
The same sand buggy pedal as above but it includes the Jamar PA1 Throttle Pedal instead of the roller throttle.

JAMAR CA1
Competition clutch pedal with slave cylinder. A single cylinder unit often used as a clutch actuator. Comes standard with JAMAR 11/16" Master Cylinder and your choice of either the JAMAR SC1 or SC2 Slave Cylinder.
Approximate weight 4 lbs.

JAMAR MCLE ~ Easy fill lid (Optional)

JAMAR CA1C
A single cylinder unit without slave cylinder. Often used for braking purposes when dual master cylinders are not necessary. Specify master cylinder bore size and disc or drum application when ordering

JAMAR CA3
A dual master cylinder unit with the JAMAR Balance Beam to provide precise, independent adjustment of front and rear braking force. This unit comes with JAMAR 6 ounce reservoir capacity master cylinders. Specify bore sizes and disc or drum application when ordering.

*Approx. weight 6 1/2 lbs.

JAMAR CA4
Swing mounted cluster - a triple master cylinder unit for virtually any application which requires dual master cylinders for braking and a single master cylinder for a hydraulic clutch. Removes master cylinder from the engine compartment and get the pedals up and off the floor of the vehicle.  This unit features the JAMAR Balance Beam, for precise independent adjustment of front and rear braking force, and comes with JAMAR 6 ounce reservoir capacity master cylinders. Does not include slave cylinder.

* Approx. weight 11 1/2 lbs.

JAMAR MCLE ~ Easy fill lid (Optional)

JAMAR PEDAL PA1 
This throttle pedal is designed for the rigors of off-road use. It has 3 holes on the side to attatch a foot rest and cable mount for a perfect cable location. Adjustable stop for full throttle without bending the butterfly shaft and a built in return spring. It is designed to fit the shape and angle of your foot for maximum comfort and control.

Steering Brakes

JAMAR  STEERING BRAKES
Jamar steering brakes utilize 5/8 diameter cylinders for maximum pressure with minimum leverage. Each piston is held in position be a separate retainer which provides an unimpaired hydraulic system even with the handles removed.

JAMAR CB1 ~ A single handle unit for all drum brakes and disc brake applications.
Requires a mounting space of only 3" X 6".

JAMAR CB2 ~ A dual handle unit for all drum brakes and disc brake applications.
Requires a mounting space of only 2-1/2" X 4-1/2".

Master Cylinders

• Cast Aluminum treated to T-6 condition
• Roller burnished bores
• Large capacity reservoirs
• Captivated Chrome-Moly push rods - 2 lengths
• Includes fitting and hardware
• Over 1 1/2" of stroke
• Tapped for 1/8" NPT fittings
• Easy to remove thumb screw lid
• Universal bolt pattern 2 1/4" O.C.
• Five sizes ~ 5/8", 11/16", 3/4", 7/8", 1"
• Available for disc or drum brakes
• Easily rebuildable if necessary
• For use with DOT 3 brake fluid
• MC ~ Standard Master Cylinder average weight 1 1/2 lbs.

Ultra Slide Pedal Mount

JAMAR US-2 
ULTRA SLIDE PEDAL MOUNT
This unit is used to adjust pedals to fit different lengths of drivers. Adjusts a full 5". Mounting holes include all Jamar sand buggy pedals and other after market pedals.

Ultra Slide Throttle Kit

JAMAR US-2T
ULTRA SLIDE THROTTLE KIT
This is a bolt on kit to use with US-2 Ultra Slide Pedal Mount that adapts a throttle pedal to a US-2. Ultra Slide fits all Jamar throttle pedals.

JAMAR JS2X POLISHED
 MID-ENGINE SHIFTER
This mid-engine unit is designed for both off-road cars and custom street cars that utilize VW transmissions in a mid-engine position. Includes rods and bushings to adapt to VW shift box. This unit requires a 1966 thru 1968 nose cone.

JAMAR JS3   SUPER SHIFTER
A super shifter designed for use in sand rails, buggies, off-road cars, and custom street cars that utilize a VW transmission. This unit may also be  utilized in Baja Bugs with a type 2 transmission.  This neat, compact shifter also works well with the Jamar Side Shifter, or Jamar Mid-Engine Shifter. It is also available with a chrome plated box in addition to rods and linkage.

JAMAR JS5 
POLISHED MID-ENGINE SHIFTER
A complete nose cone replacement shifter. Comes complete with all hardware.
Utilizes VW transmissions in a mid-engine position.

BILLET MIRROR

JBM ~ 10 = 1" TUBING CLAMP
JBM ~ 12 = 1-1/4" TUBING CLAMP
JBM ~ 15 = 1-1/2" TUBING CLAMP
JBM ~ 0   = NO CLAMP

Billet machined and polished rearview mirror with clamp on mount.

BILLET MACHINED 
& 
POLISHED GRAB HANDLE
BILLET GRAB HANDLE

• JGH ~ 10 = 1" TUBING CLAMP

• JGH ~ 12 = 1-1/4" TUBING CLAMP

• JGH ~ 15 = 1-1/2" TUBING CLAMP

BILLET BREATHER
Billet breather features:

• Two 3/8" NPT. inlets and one 1/8" drain outlet.
  This is a must for all VW Sand Rails and Drag Cars.

JAMAR QUICK RELEASE STEERING HUB
Light weight Billet housing. Spring loaded release button.
JBQR3 ~ (3 Bolt Grant Wheel)
JBQR9 ~ (9 Bolt Formula France Wheel)